Merry Christmas

 Merry Christmas, Dear Readers!

I modeled my Christmas dress this year off of a design I saw on Pinterest as well as my own imagination. 

It is a fairly simple design. 

I love sweetheart necklines! 

The sleeves are just little cap sleeves. I was messing around with a more elaborate design originally, but it drove me slightly nuts. So, back to ol' faithful!

This dress has side tabs and a corset-like "cinch" in the back for shaping (more on that later.) I made the dress loose enough to slip into so I didn't have to put a zipper in, and the cinch in the back gathers in the extra width of the dress nicely. 

Just for the record, I don't hate zippers that much. In fact, I have installed them many times with relative success. But I do find that not going with a zipper cuts a lot of time off of my dress projects. 

In case you are curious about the pattern of this dress, it is very simple. Here's a diagram of the shapes:

The front of each tab is sewn on directly in front of each dart, as you can see if you look carefully at the image below.

I began the skirt gathers underneath the tabs, and added (non-functional) buttons to the front end of the tab just for fun.

I added grommets to the other end of the tabs and laced my ribbon through, and Voila! My dress is shaped and has a lovely accent to make the back more interesting.

It's a great way to take a very simple dress design and elevate it to something special. I love this effect! 

Thank you so much for reading today!

Have a blessed Christmas!

to God be the glory,

Miss Humphrey

How I Made My Christmas Dress

Hello all!

I thought I'd show you how I made my Christmas dress I posted recently. I'm not calling this a tutorial because it lacks the detail you'd find in a pattern tutorial, for instance. But you might enjoy following this "how I did this" post if you have some experience sewing and aren't afraid to trust your instincts!

This is how most every dress of mine starts out: my fabric is folded in 1/2 the long way, and the end is folded over to make 4 layers of fabric. This section is where I cut my bodice from.

This is basically my bodice shape, without the front neckline marked. I made the bodice fairly wide so that I wouldn't have to put a zipper in this dress. (YAY!) 

Here's that shape on my folded fabric.

And when unfolded:

 I wanted to mention that I'm not just cutting out this bodice where it seems right...exactly. Some areas I've got the hang of through sewing tons of these kinds of bodices, and I can eyeball my measurements. But often when I'm making a dress I will hold the fabric up to myself and make more precise measurements in certain areas. This time I noted where the edge of the neckline should fall and where to place the shoulder as well.

It's important to add in seam allowance in these measurements. If you want your neckline to fall in a certain place, mark it ~1/2" closer to your neck. You will take in the extra material when you sew. This way you won't end up with a wider neckline than you want. 

It's especially important when you're measuring the depth of the neckline. Always err on the smaller side of things - you can always cut a larger neckline but it's not so fun to deal with a deeper neckline than you planned. Ask me how I know. 

Now it was time for me to cut my front neckline. In this picture I've unfolded my bodice, folded it in 1/2 the long way, and cut my front neckline.

 If you omit the folding in this step, your back neckline will be just as deep as your front neckline. That may be common sense to you, but for some reason, I have made this mistake multiple times, which is why I feel the urgency to warn you :)

Personally I dislike the feeling of wearing a dress with equal necklines in front and back. I once knew someone who tried to stitch the missing piece back into the back neckline. Hey, it was in a lining, so the treatment worked enough for my - I mean, *her* - purposes without being noticeable. Honestly, it shouldn't have, and I certainly can't recommend it. I dislike such sewing shamblery.

Here I did something that makes me feel a bit uncomfortable: cutting my shoulder seams. I usually would not do this, but because I wanted to insert a collar into the shoulder seams I took the plunge.

 

Next I cut out neckline facings. I usually would do a once-piece facing, but since I had already cut my shoulder seams, I did one for the front neckline and one for the back. If you'd like a visual tutorial for this, scroll down to the bottom of this post.

 

In this picture, I've sewn the facing to the front neckline, turned it over and ironed it. When you do a squarish-neckline like this, snip the corners of your seam allowance. It will help the fabric flex around your neckline easier. 

It's great to do this on curves, too, like the one on my back neckline.

Next I had darts. Oh, the dreaded darts. (The darts are ironed flat-ish in this picture.) 

Bodice shaping has caused me so much trouble in the past! Sometimes darts work nicely and sometimes they are a pain in the neck. I haven't gotten this part completely down yet, folks, so I can't give you a recipe for success! But I have figured out how to make them equal distances from the sides and middle of the front bodice, which is pretty important.

Once you've got one dart sewn in or marked, fold the bodice in half and copy your measurements onto the other side of the bodice. You can do this by snipping wherever you've snipped on the top layer or drawing the dart as best you can.

Now, on to the collar.

First I unfolded my piece of fabric vertically. Then I folded the end over, just like I did when I cut the bodice out. 

This is the shape I cut out of my fabric. It follows the neckline from the shoulder and then curves off after that.

This picture skips ahead quite a bit! Basically what I did here is cut 4 of the shape in the last picture (If you remember, my fabric was folded in half, so I just had to cut 2 of the shape pairs of collar pieces.) Then I sewed the corresponding pairs together, right sides together, leaving the tops open since they're going to sewn into the shoulder seams anyway. This way I had a lined collar. I pressed the two collar pieces flat (I think I starched them as well), and sewed them onto the front bodice shoulders. I think I sewed the back bodice onto the front at the shoulders after that, and then stitched the collar down to the center bottom of my bodice. I used a decorative stitch to stitch over the two edges of the collar as they came together below the neckline and continued down the bodice. I also sewed the bodice side seams together around this time.

Whew, that was a long description! I should have taken more pictures. 

After this, I wrestled with the collar a bit, trying to smooth out a wrinkle that had happened in one side more than the other. I will skip those details and go on to the sleeves!

My sleeve and my sleeveband, both folded. 

I just so happened to have coordinating fabric for the main print of this dress, and it was fun to put both the wine/burgandy colors together.

Here's a sleeve graphic if you are curious or confused about sleeve measurements.

From here, I puffed the top of the sleeve by gathering two rows of stitches around the curve at the top. I also gathered the bottom of the sleeve. I sewed the sleeve to the bodice and then added the sleeve band.

For the sleeve band, I sewed the ends of the fabric strip in the pic above, right sides together, to make a band. I proceeded to fold this in 1/2 the long way and starch it. This I added to the bottom of the sleeve I had gathered. I had to add a few pleats to it as well to fit it into the sleeveband, since I had extra material. I also placed a tuck in each sleeve as I showed you in the last post. I'll show you how again:

Making a tuck like this is very easy - turn the sleeve inside out and sew the two layers (front and back) together, vertically, near the edge of the sleeve. 

When you turn the sleeve back right-side-out, you'll have a cute sleeve tuck. 

Now, on to the skirt! 

I measured out a length of material that I wanted for my skirt; I used about as much fabric as I had left over from 5 yards of fabric after I had cut all of the above out :)

I use the 45" dimension of my yardage for the length of my skirt and put ~6" of material into my hem since the skirt was going to be too long for practicality. It did add to the dress weight, but I didn't want to cut it off in case I wanted to lengthen the hem someday. I sewed the ends of my skirt right sides together, and then pinned it to my bodice and took in a passel of pleats. I had soo much material to fit into the circumference of that little bodice!

Once I had sewn my pleats in, I topstitched them. After experimenting with different tactics to keep my front pleats lying smoothly down, I topstitched them all down ~5" so that they wouldn't stick out where they weren't wanted. 

I sewed two ties from my coordinating fabric (how to: cut a length of fabric a little more than twice as wide as your finished tie will be, sew the edges and one end, right sides together, turn it inside out and press it) and attached them near the side seams of my bodice. 

And that is a summary of how I made this dress! I hope it inspires you or gives you some pointers about your own sewing. 

to God be the glory,

Miss Humphrey

Merry Christmas!

 

A Merry Christmas to all my readers!

And happy 1st birthday to DIY You.

Time for a Christmas Dress!

 Hello all,

I'm finally back with a project that I'm excited to show you: a Christmas dress! 

This dress took portions of two days to make, and the sewing process was very smooth compared to many dresses I've wrestled with! 

I apologize for the lesser quality of some of my photos. I think I'll switch over to a new camera soon.

The dress features a long, full pleated skirt. 

I top-stitched ~4-5 inches down the front pleats so the pleats would not flare out in places they were not wanted :)

The sleeves turned out VERY puffy, so I put a tuck in each one to gather in some of the excess and shape the sleeve. I remember first noticing this style on a dress that my grandmother had made, and was inspired by it. 

Making a tuck like this is very easy - turn the sleeve inside out and sew the two layers (front and back) together, vertically, near the edge of the sleeve. 

When you turn the sleeve back right-side-out, you'll have a cute sleeve tuck. 

For the collar on this dress I was inspired by this blouse. I like the idea of a collar that is sewn into the shoulder seams instead of wrapping all the way around the back of the dress. Instead of the collar ending in a charming tie however, I pulled the ends down into the waistline.

To God be the glory, 

Miss Humphrey

Crafty Projects

 Greetings!

I hope you'll enjoy looking at some crafty projects I've been doing recently. 

I water-colored this autumn tree yesterday.

One of my favorite pictures to paint this fall has been a mill house with autumn colors suggesting a hill of deciduous trees in the background. But when I add those beautiful oranges, yellows and reds to the background, all of the sudden my mill house is about to be engulfed in flames!

 It can be difficult to give the impression of autumn colors without also hinting at eminent catastrophe; especially when I'm painting a forest of trees. So I did what I should have done long before; I looked at a tutorial . After implementing some of the techniques in my own way, I am satisfied with the result and hope to make my trees more realistic in the future.

I've made some Cowboy Christmas/winter cards to sell at a local shop. I have made them in 2 sizes; the larger size has sentiments inside while the smaller cards are blank.

 I made 3 categories of "sentimental" cards: encouragement, birthday and Christmas. Each of them have western sentiments for the occasion. Here's an example of an encouragement card.

I am making progress on my quilt, which features English Paper Piecing. 

(The process I was taught and the one in the tutorial are very similar; I baste my fabric "hexies" around the paper hexies instead of gluing them.)

I have yet to applique some of my hexagon circles to quilt blocks.

I hope to add a few more colors to my quilt, but for now I have teal and bright green.

As you can see, the circles are quite large when finished. The quilt blocks are 20" squares, so I don't have to make too many of them to make a big quilt; perhaps 3 blocks across and 5 down. 

I plan to put a large border of color around the finished blocks and sashing to make the finished quilt twin or double sized.

This is a picture of one of my quilt blocks folded in quarters. I just thought that it would make a pretty block by itself with the hexagon corner embellishment. This would be neat for napkins or fan-quilt style blocks. 

To finish, here's some Autumn Morning pictures from the high desert.

to God be the glory,

Miss Humphrey